Model:NBTSC-200
1,Introduction:
Noble second generation main power intelligent traffic light controller is suitable for many kinds of intersection,such as four ways,three ways and two ways intersection.The controller supports remote control and internet communication.
The max channel is 44 channel driving control(36 channel for vehicle lights,8 channel for pedestrian lights).GPS time synchronization,traffic actual,pedestrian push button,green wave are our intelligent traffic light controller features.
2,Cabinet:
3,Advantage of Intelligent Traffic light Controller :
4,Features of Traffic singal controller :
1,
Two method of program the controller,handheld and traffic management software.
2,
Four working mode:Pre-time mode(1-1),Green wave mode(1-2),Pedestrian push button mode(2-1,2-2),traffic vehicle actual mode(3-2,3-3).
3,
Signal plan:240 solution,30 stages and 240 menu with 30 phase,week plan,special day plan.
4,Hurry call.
5,
Detect function:Lamp failure detector,low valtage detect,green conflict detect,loop failure detect.
6,
Traffic control function,make control the whole direction lamp,also can set each lamp status.
7,
Support forced flash function,turn on /off lamp one by one function.
8,
special menu:Loop detector failuret menu(240),East,West amber flashing&South North red flashing menu(251),East ,West red flashing&South North amber flashing menu(252),All red flashing menu(253),Juction off menu(254),Amber flashing menu(255).
9,Support total fault detection enable DIP setup functions input(main power controller).
Traffic light controller system architecture diagram :
5,Intelligent Traffic Light Software:
1,User-Friendly man-interface is easy to use and set parameter for the intersection.
2,Communications can be established over Ethernet,fiber or GPRS
3,Support Bing map,Open Street map、Open Cycle Map 、Google Map、Nokia Ovi Map etc international map,maps can be updated.
4, Support online map and offline map data.
5,Support dual green wave function.
6,Support LAN and WAN internet.
7,Software parameter setting all equip with the Foolproof protction mechanism.
8,Plan setting equip with the green wave conflict detect mechanism.
9,Fault diagnose can be record,analysis and monitor,it is also belong to user-defined items.
10,Compatible with windows X86 and windows X64 operating systems.
11,Software install easily.
6.GRPS/Ethernet Traffic Controller with Wireless Pedestrian Push Button Feature:
pedestrian push button two mode:
① Mode number 2-1,the running of vehicle signal light is according to the plan what we set circularly.pedestrian light always is OFF, When someone press the push button, if this direction’s pedestrian green light doesn’t have conflict with other directions’ pedestrian green light, the pedestrian green light will be ON: If this direction’s pedestrian green light has conflict with other directions’ pedestrian green light, then this direction’s pedestrian
light will not be ON soon, however the pedestrian red light will flash until the there is no green conflict, the green light will be ON.
②Mode number 2-2, the vehicle signal light will run according to the plan we set circularly.All the directions’ pedestrian red light will be ON. When someone press push button, if this direction’s pedestrian green light doesn’t have conflict with other direction’s pedestrian green light, the pedestrian green light will be ON. If this direction’s pedestrian green light has conflict with other directions’pedestrian green light, then this direction’s pedestrian light will not be ON soon, the green light will be ON until the there is no green conflict,at same time the pedestrian red light will be OFF.
7,Traffic Singal Controller With Vehicle Loop Detector Function :
Introduction:
NOBLE vehicle loop detector is used for wherever vehicles have to be detected,for example for monitoring and safeguarding access ways or for counting vehicles. The output signal can be used for controlling door and gate drive mechanisms, operating barriers,controlling traffic light systems or activating card dispensers in parking
lots. And there are Single & Dual channel can be chosen.
Features:
Self-tuning range: |
20-2000uH |
Sensitivity: |
16 levels are adjustable |
Response time: |
10-90ms |
Connection: |
11-pin submarginal type(86cp1) |
Relay output: |
2 relays, users configurable
as presences or pulse output, normally open
(N/ON) contact |
Here are traffic light controller sales:
traffic control system
solar powered traffic system
GPS synch roadsigns system
Arrow board system
parking guidance system