Inductive Loop Detector
Item NO.:LD-102 inductive loop detector
A）single channel Loop magnetic Detector description
The loop consists of several loops of wire and consideration
should be giving to the loop sensitivity when installing on different surfaces. Setting the correct sensitivity allows the loop to operate with maximum detection (16 levels via a trimpot). When detection occurs, the detector energises 2 relays for the output (each can be configured individually). This energising of the relay can be configured into different modes, by selecting the respective dip switch.
B）Traffic Loop Detectors Features :
Compact Size: the compact and well engineered housing Combines all of the industry requirements regarding
Features and functionality and allows this detector to be Incorporated into any or existing traffic detection system.
Diagnostic Capabilities: Comprehensive diagnostics Capabilities allow for accurate diagnosis of loop and
Installation problems.
Two separate output relays:
Presence Relay A is presence output. Can be extended for 0,2,5,8,10,15,20 or 30 seconds, programmable with external 10 way DIP switches.
Pulse Relay B, programmable with external 10 way DIP switches, provides presence, pulse on entry, pulse on exit, or failed output.
C）Traffic Vehicle Loop Detectors Technical :
| Self-turning range: 20-2000μH |
Response Times: Turn-on 10-90MS,Turn-off 10-90MS |
Sensitivity: 16 elvels selectable
|
Visual Indications: Power LED-Red,Channel LED-Green |
| Frequency: 4 step switch |
Relay Output: Presence Relay/Fault Relay |
Power Requirements: 12-24VADC |
Humidity: Up to 95% relative humidity without condensation |
| Operation Temp: -40℃ to +70℃ |
Presence Relay output time:0-30 seconds can be adjust. |
Fault Output:
Blinks slowly: It maybe because
the loop is short circuit or the no: of turns is not enough.
Blinks faster: It maybe because the loop is open or the no: of turns is too many. |
D）Loop detector order information:
LD-100 single channel, boxed, 1 type 11pin connects 100-240VAC
LD-102 single channel, boxed, 1 type 11pin connects 12-24VADC
LD-105 single channel, boxed, 2 type 11pin connects 100-240VAC
LD-106 single channel, boxed, 2 type 11pin connects 12-24VADC
Tech about Loop detectors:
How to installtion the loop detector wire?
How Loop Detector work?
Brochure>>
Software Copyright>>
Certification>>
Compare Video(with Nortech,EMX,Procon,BEA,and China Red loop detector:
https://www.youtube.com/watch?v=LZPIMrxCSbk
https://www.youtube.com/watch?v=0LUQTfA62zs
https://www.youtube.com/watch?v=D5KgiFt4Wtc
https://www.youtube.com/watch?v=HRA0fgTvkc8
https://www.youtube.com/watch?v=Fv1XkRFOSfw
Our products are 100% exported. We enjoy a good reputation in some main markets, oversea markets around European countries and Middle Eastern area, such as Sweden, England, Italy, Poland, Romania, Serbia, Turkey, Israel, Spain, USA, Kartel, Russia Ross, Singapore , etc, for our high quality products and good after sale service.
our other loop detector sale;
Green Traffic Detecting Vehicle Loop Detector Double Channel Toll station Use
White 24VDC Traffic Loop Detector Vehicle Access Control Equipment
Toll Staion Vehicle Access Control Traffic Loop Detector 220VAC FCC & CE
10ms Reaction 0.2kg Traffic Light Detector For Parking Syetem
Outdoor Indoor Parking Guidanc System Car Carbon Monoxide Detector 0.25kg
products KeywordsTraffic Detectors,Ground Loop Detector Info,Double Loop Vehicle Detector,Vehicle Loop Detectors
|
