24V back to back traffic light

• 
• 
• 
• 
• 

item:NBB2B-2-C   24VDC Back to back traffic signal light

Shape:100mm (4")Cobweb cover;

High brightness LEDs with integrated optics;

Moisture and dust tight seal(IP65)

Total Harmonic Distortion<20%(with PFC);

Operating Temperature Range(optional):-20°C to 60°C

Angle:Avg. ≥30°  Down ≥30°;

Operating voltage Range:DC24V

Insulation Resistance:≥2M;

Life:100,000H;

housing material:PC(PMMA);

JD100 series traffic signal

1.Reduce overall operating & maintenance costs:Energy 

2.saving:90% reduction in power consumption vs incandescent;

3.Reliability & traffic safety:·Improved visibility over life of the product 

4.Reduces emergency lamps outs 

5.Design minimizes sun phantom effects;

6.Easy to install into existing signal enclosure.

Install the shield:

1, Confirming the installing direction of the traffic signal light .

2, Fixing the aluminum shield to the traffic signal panel with four nails of M4*6 standards

Hole position:

Drilling three holes with Ø15 millimeter diameter,refer to the left installation diagram 

Height: the traffic core will be fixed to the pole with 2.5M height (the distance between the ground and the lowest end of pole)

The frontispiece of the traffic light must face to the middle of vehicle channels 

Installation step:

Inserting the tip to the two holes and locked up by club gasket

Inserting the cable

Fixing the two traffic brackets to the M10 screws

Screwing down the nut

our other 100mm led traffic signal light for sales:
L 100mm traffic light
100mm led traffic signal light core
100mm led signal traffic light
220V led vehicle signal light
24V vehicle traffic light
100mm traffic light PC housing

Products Keywords:100mm LED traffic light,100mm vehicle traffic signal light,100mm parking traffic light,100mm toll traffic light,12V 4'traffic light,24VDC traffic light,24VAC 4'traffic signal light