4inch back to back traffic light

• 
• 
• 
• 
• 

Product Name: Back to back 100mm traffic signal light

Product Type :NBB2B-2-C

Place of origin:China

Shape:100mm (4")Cobweb cover;

High brightness LEDs with integrated optics;

Moisture and dust tight seal(IP65);

Total Harmonic Distortion<20%(with PFC);

Operating Temperature Range(optional):-20°C to 60°C

Angle:Avg. ≥30°  Down ≥30°;

Operating voltage Range:DC12V

Insulation Resistance:≥2M;

Life:100,000H;

housing material:PC(PMMA);

JD100 series traffic signal

1.Reduce overall operating & maintenance costs:Energy 

2.saving:90% reduction in power consumption vs incandescent;

3.Reliability & traffic safety:·Improved visibility over life of the product 

4.Reduces emergency lamps outs 

5.Design minimizes sun phantom effects;

6.Easy to install into existing signal enclosure.

Install the shield:

1, Confirming the installing direction of the traffic signal light .

2, Fixing the aluminum shield to the traffic signal panel with four nails of M4*6 standards

Hole position:

Drilling three holes with Ø15 millimeter diameter,refer to the left installation diagram 

Height: the traffic core will be fixed to the pole with 2.5M height (the distance between the ground and the lowest end of pole)

The frontispiece of the traffic light must face to the middle of vehicle channels 

Installation step:

Inserting the tip to the two holes and locked up by club gasket

Inserting the cable

Fixing the two traffic brackets to the M10 screws

Screwing down the nut

our other 100mm led traffic light sales:
1, 4inch traffic light core
2, 100mm led traffic light
3, 24V vehicle traffic light
4, 100mm red cross green arrow traffic light
5, 12VAC parking system
6, 12VAC toll station signal light
7, 100mm led traffic light core
8, 100mm led traffic light Aluminium housing
 

Products Keywords:100mm LED traffic light,100mm vehicle traffic signal light,100mm parking traffic light,100mm toll traffic light,12V 4'traffic light,24VDC traffic light,24VAC 4'traffic signal light