| 20 ~ 80KHz Inductive Loop Detector Road Safety Equioment Traffic Loop Detector
   
 Item NO.:Road safety equioment traffic loop detector, vehicle loop detector, inductive loop detector Loop detectors in recent years have become a popular tool having innumerable applications in policing, right from surveillance operations to traffic control. Automation of gates and doors has become a popular usage of the loop detector. Features :  1) Reset Switch : The reset switch enables the detector to be manually resetduring  commissioning and testing . This results in the detector re-tuning the
 sensing loop
 and becoming ready for vehicle detection ;
 2) Selectable Pulse Time : This feature sets the length of time that the pulse relay
 will be energized for 1 Second or 0.5 Seconds ;
 3) Pulse Relay Selection : The Pulse Relay may be configured to energize on detection
 of a vehicle or when the vehicle leaves the loop ;
 4) Sensitivity Boost : This feature sets the undetect level to maximum sensitivity and is
 used to prevent loss of detection of high-bed vehicles ;
 5) Switch Selectable Sensibility : 11 levers adjustable sensitivity setting are available
 on the switches to allow flexibility in configuration ;
 6) Switch Selectable Frequency : 4 frequency settings are available to prevent
 cross-talk between adjacent loops ;
 7) Filter Option : This option is used to provide a delay between detection of the
 vehicle and  switchiing of the output relay . This relay is normally used to prevent
 false detection of small or fast moving objects ;
 8) Permanent Presence Option : This feature ensure detection of the vehicle will
 be maintained when the vehicle is parked over the loop for extended periods .
 Specifications: 
          
            | Self-turning range | 20-2000μH |  
            | Response Times | 10-90MS |  
            | Sensitivity | 16 way selectable levels |  
            | Visual Indications | Power LED-Red, Channel LED-Green |  
            | Frequency | Four step switch, selectable 20-80KHz |  
            | Relay Output | Presence Relay/Fault Relay |  
            | Power Requirements | 110-240VAC (48 to 62Hz) |  
            | Fault Output | Blinks slowly, Blinks faster |  
            | Reset | Reset by push button on front of enclosure |  
            | Product size | 92*76*42mm |  
            | Label Language | English |  
            | Connections | 11-pin Submagnal |  
            | Storage Temperature | -40 to 80 Celsius degree |  
            | Normal Working Temperature | -40 to 70 Celsius degree |     Applications:  Traffic Control ApplicationVehicle Counting
 Toll Systems
 Traffic Analysis
 Parking Control Application
   Competitive Advantage:  Self-turning range: 20-2000μHResponse Times: Turn-on 10-90MS
 Turn-off 10-90MS
 Sensitivity:       16 way selectable
 Highest 0.010% DL/L
 Lowest 2.56% DL/L
 Trade Terms
 1. Payment: T/T, 30% deposits before production, 70% balance to be paid before delivering(Western Union or Escrow, Cash are welcomed).
 2. Production lead time for samples:1-2 work days: 1-300sets: 5-7 work days: 7-10 work days: >500sets 10-15 work days.
 3. Shipping port: Shenzhen, Mainland China.
 4. MOQ: 5 sets
 5: Warranty: 2 years
 
 Warranty Period:
 
 This product warranty is 2 years, man-made damage, natural disasters, accidents and
 other causes damage is not covered by warranty. After two year paid to provide
 products or firmware replacement parts repair.
  FAQ:  Q1: If the detector is not working?A1: Press reset
 Q2: If red led indicator is not fully lit?
 A2: Check for power supply
 Q3: If green led indicator blinks slowly?
 A3: It maybe because the loop is short circuit or the no: of turns is not enough.
 Q4: If green led indicator blinks slowly?
 A4: It maybe because the loop is open or the no: of turns is too many.
 Q5: If no: of turns is not enough?
 A5: Lower the frequency (if the frequency is still too high, you must add more turns).
 Q6: If no: of turns is too many?
 A6: Higher the frequency (if the frequency is still too low, you must remove some turns).
 Ordering Information: LD-100  single channel, boxed, 1 type 11pin connects 100-240VAC(EU standard)LD-102  single channel, boxed, 1 type 11pin connects 12-24VADC(EU standard)
 LD-105  single channel, boxed, 2 type 11pin connects 100-240VAC(USA standard)
 LD-106  single channel, boxed, 2 type 11pin connects 12-24VADC(USA standard)
         Brochure>> 
 Software Copyright>>
 
 Certification>>
 
 Compare Video(with Nortech,EMX,Procon,BEA,and China Red loop detector:
 https://www.youtube.com/watch?v=LZPIMrxCSbk
 https://www.youtube.com/watch?v=0LUQTfA62zs
 https://www.youtube.com/watch?v=D5KgiFt4Wtc
 https://www.youtube.com/watch?v=HRA0fgTvkc8
 https://www.youtube.com/watch?v=Fv1XkRFOSfw
   
   
 
  
 
 Tag: Vehicle access control, automatic door used ; parking lot  sensor system; toll system Tag : traffic inductive loop, car loop detector    our other loop detector sale;Black PC Material Inductive Loop Detect Single Channel 0.18kg
 Black Traffic Light Sensors For Access Control System / Car Parking Management
 Dual Way Traffic Detection System Gate Loop Detector With Two Relays
 12V / 240V Double Way Traffic Loop Detector With Traffic Directional Detection Fuction
 Parking System Traffic Loop Detector PC Housing 92 * 76 * 42mm
   Shenzhen Noble Opto Co., Ltd.  Contact Person: Ms. Lina Liao Tel:86-755-2765-1481 Fax:86-755-2765-1483   |